Skip to main content
OpenpassAI

Study guide10 min read

Network+ N10-009 Performance-Based Questions: What to Expect and How to Practice

PBQs are the questions you do rather than answer. Here’s what CompTIA says about them, the N10-009 objectives they draw on, a strategy for exam day, and 4 to try right now.

By , Founder

Published

On this page
  1. The short answer
  2. What a performance-based question is
  3. How PBQs work on the Network+ exam
  4. Try Network+ PBQs now
  5. The objectives to practice hands-on
  6. A strategy for exam day
  7. How to practice for Network+ PBQs

Network+ N10-009 performance-based questions

10

of the 25 N10-009 objectives start with “Given a scenario”: the skills PBQs ask you to apply.

PBQ type
Simulation
PBQs to try below
4
Domains
5
Objectives
25

The short answer

  1. What they are: tasks you do instead of answers you pick: configure a device, place parts on a diagram, sort items, put steps in order. CompTIA calls them performance-based questions.
  2. On N10-009: Network+ uses simulation PBQs, as CompTIA lists it. They’re part of the exam’s up to 90 questions, in 90 minutes; CompTIA doesn’t publish how many are PBQs.
  3. The rules that help: you can skip a simulation PBQ and come back, your work is saved, there’s a reset button, more than one path can be right, and partial credit may be given.
  4. Practice here: we have 6 free Network+ PBQs, 4 of them in this post. 10 of the 25 objectives start with “Given a scenario”: those are the skills to practice hands-on.

What a performance-based question is

CompTIA describes performance-based questions (PBQs) as exam items that test your ability to solve problems in real-world settings. They come in two kinds:

Simulations approximate a tool or environment, such as a firewall, a network diagram, a terminal window or an operating system. Their functions are limited, but more than one response or path can work.

Virtual environments are real virtual machines running the actual software, so every wrong turn is possible too.

Network+ has simulations only, according to CompTIA’s list. SecurityX is the exam with virtual environments as well; 12 others have simulations like Network+.

How PBQs work on the Network+ exam

CompTIA lists N10-009 as up to 90 questions, “a mix of multiple-choice and performance-based questions”, in 90 minutes. It doesn’t say how many are PBQs, and no one outside CompTIA can tell you for sure.

What CompTIA does say, on its PBQ page and PBQ FAQs:

You can skip a simulation PBQ and come back. Press Next to move on; the work you’ve done is saved. (Virtual PBQs can’t be skipped, but Network+ doesn’t have them.)

There’s a reset button. It clears your work on that question only, so you can start it again.

The instructions stay with you. You can minimize, move and resize them, and bring them back with the show question button.

More than one path can be right. If you reach the correct solution another way, it’s scored as correct.

Partial credit may be given. CompTIA says some questions offer it, without saying which.

Try Network+ PBQs now

These are our own Network+ PBQs, not CompTIA’s: 4 of them here, in matching, ordering and sorting, each explained once you check it. The other 2, with a network diagram and a Windows terminal, need a wider screen: they’re on the Network+ PBQs page. CompTIA also has its own sample simulation to try.

Network+ N10-009

4 performance-based questions

You do each task instead of picking an answer. Every question is explained after you check it, and you get a score at the end.

  1. 1Match each protocol to its portMatching · Networking Concepts
  2. 2Choose the smallest subnet that fitsMatching · Networking Concepts
  3. 3Put the troubleshooting methodology in orderOrdering · Network Troubleshooting
  4. 4Sort by OSI layerSorting · Networking Concepts

The objectives to practice hands-on

CompTIA writes each objective with a verb that says how deep to go. 10 of the 25 N10-009 objectives start with “Given a scenario”: you’ll be asked to apply them, not just recall them. They’re the natural material for a PBQ, and the ones to practice by doing.

Network Troubleshooting has the most of them, 4 of its 5. The full list is below, with each domain’s weight.

1.0Networking Concepts

23% of the exam · 1 of 8 “Given a scenario”

  1. 1.7Given a scenario, use appropriate IPv4 network addressing.IPv4 addressing: public and private ranges, address classes, loopback and APIPA, and subnetting with CIDR and VLSM.

2.0Network Implementation

20% of the exam · 2 of 4 “Given a scenario”

  1. 2.2Given a scenario, configure switching technologies and features.Configuring VLANs, 802.1Q tagging, link aggregation, speed and duplex, spanning tree and jumbo frames.
  2. 2.3Given a scenario, select and configure wireless devices and technologies.Choosing and configuring wireless: channels and widths, frequency bands, network types, encryption, guest networks and antennas.

3.0Network Operations

19% of the exam · 2 of 5 “Given a scenario”

  1. 3.2Given a scenario, use network monitoring technologies.Monitoring networks with SNMP, flow data, packet capture, baselines, logs and alerts.
  2. 3.4Given a scenario, implement IPv4 and IPv6 network services.Running DHCP, SLAAC, DNS (including DNSSEC and DNS over HTTPS) and time protocols in IPv4 and IPv6 networks.

4.0Network Security

14% of the exam · 1 of 3 “Given a scenario”

  1. 4.3Given a scenario, apply network security features, defense techniques, and solutions.Hardening devices, network access control, ACLs and URL filtering, key management, and security zones such as screened subnets.

5.0Network Troubleshooting

24% of the exam · 4 of 5 “Given a scenario”

  1. 5.2Given a scenario, troubleshoot common cabling and physical interface issues.Finding and fixing cable, interface and hardware faults, from the wrong cable to CRC errors and exceeded PoE power budgets.
  2. 5.3Given a scenario, troubleshoot common issues with network services.Fixing switching and routing problems: spanning tree loops, wrong VLANs, routing tables, address pool exhaustion and wrong IP settings.
  3. 5.4Given a scenario, troubleshoot common performance issues.Fixing congestion, bottlenecks, latency, packet loss and wireless problems such as interference and poor coverage.
  4. 5.5Given a scenario, use the appropriate tool or protocol to solve networking issues.Choosing the right tool: protocol analyzers, ping, traceroute, nslookup and dig, device show commands, cable testers and Wi-Fi analyzers.

A strategy for exam day

Do the time math first. 90 minutes for up to 90 questions is about a minute each, and a PBQ can take several. Budget for it.

Skip a PBQ that stalls you. CompTIA’s own advice is to move on if you don’t feel confident and come back. One approach: answer the multiple-choice questions first, then return to the PBQs with the time that’s left.

Read the whole task before you touch anything. Note every requirement: one task can need several changes, not one.

Don’t leave one blank. Partial credit may be given, so a partly done PBQ can still score.

Use reset only to start over. It wipes everything you did on that question.

How to practice for Network+ PBQs

Work through the “Given a scenario” objectives hands-on. Subnet by hand, build a small network in a simulator, and run ping, tracert, nslookup and ipconfig until their output reads easily.

Do the free PBQs and labs. All 6 are on the Network+ PBQs page, and the hands-on labs practice the same skills in a simulated terminal.

Mix in timed practice exams. The free Network+ practice test checks the multiple-choice side. When you score well above the pass mark, book the exam.

Know the vocabulary. PBQs use the exam’s terms in their scenarios: the Network+ acronyms post has all of them, and the objectives checklist tracks every objective. The Network+ study guide puts it all in a plan.

FAQs

Got Questions? We’ve Got Answers.

Find quick answers or contact our support team.

How many PBQs are on the Network+ N10-009 exam?

CompTIA doesn’t publish the number. It lists N10-009 as up to 90 questions, “a mix of multiple-choice and performance-based questions”, in 90 minutes.

Can you skip PBQs on Network+?

Yes. Network+ has simulation PBQs, and CompTIA says you can skip a simulation PBQ and come back to it later; your work on it is saved.

Do Network+ PBQs give partial credit?

They may. CompTIA says some questions offer partial credit, but keeps which ones confidential.

Does Network+ have virtual machine PBQs?

No. CompTIA lists Network+ among the exams with simulation PBQs. SecurityX is the one with virtual environments as well.

Where can I practice Network+ PBQs?

CompTIA has a free sample simulation at demosim.comptia.org. We have 6 free Network+ PBQs, each explained (4 of them in this post), and the hands-on labs practice the same skills.

Ready to Get Certified Faster?

Start free today or see it in action first.

Pip from OpenpassAI

Hi 👋 I’m Pip, your OpenpassAI study buddy. Ready to prepare for your exam the smarter way?

Ready to explore OpenpassAI? I can show you how the platform helps you prepare, practice, and pass.