On this page
The short answer
- The exam: Network+ is one exam, N10-009. Up to 90 questions in 90 min, and you need 720 out of 900 to pass.
- Study time: about 120 hours if you’re new to IT, 80 with some experience and 50 if you already do the work. These are our estimates; your pace will vary.
- What to study: 5 domains. Network Troubleshooting carries the most, at 24% of the exam.
- How to practice: take our free 90-question practice exam and the free performance-based questions, then study the domains you score lowest in.
The Network+ exam at a glance
Network+ proves you can set up, run and troubleshoot networks. It’s the usual step between A+ and Security+, and the certification network support jobs ask for. The exam has up to 90 questions in 90 min. Scores run from 100 to 900, and you need 720 to pass. It mixes multiple-choice and performance-based questions, where you complete a task instead of picking an answer.
CompTIA recommends A+ and 9–12 months in networking before you sit it, but doesn’t require it. Exam prices are set by country: see the Network+ exam guide for CompTIA’s price where you’ll test.
- Exam code
- N10-009
- Questions
- Up to 90
- Time
- 90 min
- Passing score
- 720 / 900
- Performance-based questions
- Yes
- Cost
- Varies by country
What’s on the exam, domain by domain
CompTIA lists everything the exam covers in its exam objectives, grouped into domains, each with a share of the questions. Study in proportion to those weights, and spend the most time on the heaviest ones. Each domain below has its key topics and one practice question to check yourself.
Domain weights on N10-009
The share of the exam each domain makes up, from CompTIA’s exam objectives.
- Networking Concepts23%
- Network Implementation20%
- Network Operations19%
- Network Security14%
- Network Troubleshooting24%
| Domain | Weight |
|---|---|
| Networking Concepts | 23% |
| Network Implementation | 20% |
| Network Operations | 19% |
| Network Security | 14% |
| Network Troubleshooting | 24% |
N10-009 · domain 123% of the exam
Networking Concepts
Key topics
- The OSI model and what works at each layer
- Ports and protocols, from FTP and SSH to SIP and LDAPS
- Appliances and functions: firewalls, IDS and IPS, load balancers and proxies
- Cloud networking: virtual private clouds, gateways and security groups
- Cabling, fiber types and transceivers; topologies such as spine and leaf
- IPv4 subnetting and IPv6, plus SDN, SD-WAN, VXLAN, Zero Trust and SASE
Check yourself
At which OSI layer do routers mainly work?
N10-009 · domain 220% of the exam
Network Implementation
Key topics
- Routing: static routes, OSPF, BGP, administrative distance, NAT and PAT
- Switching: VLANs, 802.1Q trunks, link aggregation and Spanning Tree
- Wireless: bands and channels, SSIDs, WPA3-Enterprise, antennas and controllers
- Physical installations: MDF and IDF rooms, racks, power and cooling
Check yourself
Which protocol stops switching loops between redundant switch links?
N10-009 · domain 319% of the exam
Network Operations
Key topics
- Documentation: physical and logical diagrams, rack diagrams, IP address management and SLAs
- Life cycle, change and configuration management
- Monitoring: SNMP, flow data, packet capture, syslog and SIEM
- Disaster recovery: RPO, RTO and hot, warm and cold sites
- DHCP, DNS (records, DNSSEC and DNS over HTTPS) and time synchronization
- Remote access and management: VPNs, jump boxes and out-of-band management
Check yourself
Which protocol polls devices for metrics and receives traps from them?
N10-009 · domain 414% of the exam
Network Security
Key topics
- Security basics: the CIA triad, encryption, PKI and authentication (MFA, SSO, RADIUS, TACACS+)
- Attacks: DDoS, VLAN hopping, MAC flooding, ARP and DNS poisoning, rogue devices and evil twins
- Defenses: device hardening, NAC, 802.1X, port security, ACLs and screened subnets
- Compliance and segmentation, including PCI DSS, GDPR and IoT and OT networks
Check yourself
An attacker sends forged ARP replies so traffic for the gateway goes to their machine. What is this?
N10-009 · domain 524% of the exam
Network Troubleshooting
Key topics
- CompTIA’s troubleshooting methodology
- Cabling and interface problems: CRC errors, attenuation, wrong cables or transceivers and PoE budgets
- Network service problems: loops, wrong VLANs, routing, DHCP exhaustion and duplicate addresses
- Performance problems: congestion, latency, jitter, packet loss and Wi-Fi interference
- Tools: ping, traceroute, nslookup, dig, tcpdump, Nmap, protocol analyzers, LLDP and switch show commands
Check yourself
A Windows PC shows the address 169.254.10.20. What’s the most likely problem?
How long to study for Network+
Our estimate is about 120 hours of study if you’re new to IT, 80 hours with some IT experience and 50 hours if you already work in the field. At 8 hours a week, that’s roughly 15, 10 or 7 weeks. Pick your starting point and the time you have each week to see your own plan.
Where are you starting?
Hours a week you can study
- hours of study
- 120
- weeks
- 15
- exam-ready by
- Mar 2, 2027
- Weeks 1–3Networking Concepts
- Weeks 4–6Network Implementation
- Weeks 7–9Network Operations
- Weeks 10–11Network Security
- Weeks 12–14Network Troubleshooting
- Week 15Full practice exams and review, then book the exam
Hours are our estimates for each starting point; the weeks follow each domain’s weight on the exam. Make a day-by-day plan with your exam date.
Is Network+ hard?
CompTIA rates Network+ a foundational certification, and with steady study you can pass it on your first try. Here’s what you’re up against, then what trips people up.
Network+ asks you to apply what you know to scenarios, not just recall it. Subnetting, ports and protocols, and choosing the right fix for a troubleshooting scenario are where most people lose marks.
Its performance-based questions can have you complete a network diagram or configure devices. Practice subnetting until it’s quick, and work through scenario questions out loud.
- CompTIA’s level
- Foundational
- Recommended experience
- A+ and 9–12 months in networking
- Passing score
- 720 / 900
- Performance-based questions
- Yes, alongside multiple choice
- Our study estimate
- 120 h new to IT · 80 h with some experience · 50 h in the field
- Exams to pass
- One: N10-009
A study plan that works
Start with the official objectives. Download them from CompTIA and keep them open: every question on the exam maps to one.
Take a practice test before you study. A quick test shows which domains you already know, so your time goes where it’s needed.
Study one domain at a time, by weight. Read or watch, then do something hands-on: type the commands, configure the settings, try the labs.
Practice the performance-based questions. They take longer than multiple-choice questions and test doing, not recalling, so rehearse them.
Sit full-length practice exams. When you score well above the pass mark on fresh attempts, and your weakest domain has caught up, book the exam.
Free Network+ study resources
Everything below is free and needs no sign-up. OpenpassAI adds an AI tutor that knows the N10-009 objectives, full timed exams and a readiness score, then helps you get the job with mock interviews, resume tools and a salary coach. Try it free.
- Free Network+ practice exam: 90 questions, timed
- Free Network+ performance-based questions
- 7 free hands-on labs for Network+
- Every Network+ exam objective, as a checklist
- A free Network+ study plan with your exam date
- The Network+ exam guide: facts, dates and changes
- IT Acronyms: every acronym on CompTIA exams, explained
- Common Ports: the port numbers to know
- Subnet Calculator
- Subnetting Practice
On exam day
Watch the clock. 90 min for up to 90 questions is about a minute each, and performance-based questions take longer.
Don’t get stuck on a performance-based question. CompTIA says simulation questions can be skipped and returned to later, with your work saved. Answer the multiple-choice questions, then come back.
Read every option. Several answers often look right; choose the best one for the situation described.
Flag and review. Mark questions you’re unsure of, finish the rest, then use the time left to review them.
Test where you’re comfortable. CompTIA exams are taken at a Pearson VUE test center or online with a remote proctor. Online, you need a quiet private room and a webcam.