On this page
The short answer
- 7 changes take a new router from factory settings to secure: changing default credentials, updating firmware, choosing a wireless security mode, turning off WPS, UPnP and remote management.
- Change the administrator password first. Default passwords are published, so anyone who can reach the admin page can sign in until you do.
- CompTIA tests this on A+. A+ Core 2 (220-1202) objective 2.10 reads: “Given a scenario, apply security settings on SOHO wireless and wired networks.”
- Practice it in your browser. Our free SOHO router lab gives you a router’s admin page and checks each change as you make it. It takes about 10 minutes.
Why a new router isn’t ready to use
SOHO stands for small office/home office. A SOHO router is the one box that connects a handful of computers, phones and printers to the internet and to each other.
Out of the box it is set up to work, not to be safe. In our lab’s scenario, a dental practice has plugged in a new router and started using it: the admin password is still admin, the Wi-Fi uses WEP, and the admin page can be opened from the internet.
Securing it means going through the admin page and changing those settings before the network carries anything that matters.
Secure a new SOHO router in 7 steps
These are the tasks of the lab, in the order a technician would do them, with where each setting usually lives and why it matters. Menu names differ between router makes, but the settings are the same.
| Step | What to change | Where, and why |
|---|---|---|
| 1 | Change the administrator password from the default to one of at least 12 characters. | Administration tab. Default passwords are published, so this is always the first change. |
| 2 | Update the firmware to the latest version. | Administration tab, Update firmware. Updates fix known security holes. |
| 3 | Rename the wireless network to BrightSmile-Office. | Wireless tab. A default name tells an attacker the router’s make. |
| 4 | Switch the wireless security to WPA3-Personal, with a new passphrase of at least 12 characters. | Wireless tab. WEP is broken and can be cracked in minutes. |
| 5 | Turn off WPS. | Wireless tab. The WPS PIN can be guessed, which bypasses a strong passphrase. |
| 6 | Turn off remote management. | Administration tab. The admin page shouldn’t be reachable from the internet. |
| 7 | Turn off UPnP. | Security tab. UPnP lets any device on the network open ports to the internet. |
Then set it up for the office
A secure router still has to be configured for the people and devices that use it. That is the second half of the job, and our second lab covers it: setting a DHCP range, reserving addresses for fixed devices, forwarding a port to an internal device, isolating a guest wireless network.
The idea behind each is simple. A DHCP range hands out addresses to devices that come and go. A reservation gives a printer or a recorder the same address every time, so other devices can find it. A port forward lets one service on the inside be reached from outside. A guest network gives visitors internet access without access to the office’s own devices.
What CompTIA A+ asks about SOHO networks
Two objectives cover this work, one on each A+ exam. On CompTIA A+ Core 1 (220-1201), objective 2.6 is “Given a scenario, configure basic wired/wireless small office/home office (SOHO) networks.” In plain words, that is setting up a small office network: IPv4 and IPv6, private and public addresses, APIPA, static and dynamic addressing, subnet masks and gateways.
On CompTIA A+ Core 2 (220-1202), objective 2.10 is “Given a scenario, apply security settings on SOHO wireless and wired networks.” In plain words, that is securing small office routers and networks: default passwords, encryption, guest access, firmware, IP filtering and screened subnets.
Both begin “Given a scenario”, which is how CompTIA marks an objective you may have to carry out, not only recognize. A+ includes performance-based questions, and a router’s settings page is a natural fit for one. Our A+ objectives checklist lists every objective on both exams.
How to practice
Do the lab once with the hints, then again without them. When you can make all 7 changes from memory and say why each one matters, move on to performance-based questions under time pressure.